Open the Dial-Out Parameters tab of the ISDN Data Connections dialog to define additional parameters for dialing out.
To manage the ISDN connections for dialing out, click on the Dial-Out Connections tab; in order to edit the ISDN connections for dialing into the camera, click on the Dial-In Connections tab.
|Warning:||Never deactivate the limits of dial-out accounting as this may lead to high costs for ISDN calls when misconfiguring the camera, for example!|
|Dial-Out Pause||Set the time in seconds for the camera to wait between two dial attempts.|
Using the dial-out limits helps you limit the costs of ISDN operation.
The enabled option (default) blocks further dial-out attempts once the defined limits have been reached.
You can configure various limits that will block dial-out once they are reached:
|Reset Counters||Click on the Reset button to reset all counters for ISDN dial-out.|
|Status||This shows the current status of ISDN dial-out. In case the dial-out is blocked, you will find a description in this field.|
Click on the Set button to activate your settings and to save them until the next reboot of the camera.
Click on the Factory button to load the factory defaults for this dialog (this button may not be present in all dialogs).
Click on the Restore button to undo your most recent changes that have not been stored in the camera permanently.
Click on the Close button to close the dialog. While closing the dialog, the system checks the entire configuration for changes. If changes are detected, you will be asked if you would like to store the entire configuration permanently.
In order to enable these settings, you need to store the configuration and reboot the camera!
|cn, de, en, es, fr, it, jp|